Tektronix KEITHLEY 707B, Справочное руководство

Страница: 442 / 534

Models 707B and 708B Switching Matrix Reference Manual Section 7: TSP command reference
707B-901-01 Rev. B / January 2015 7-211
Details
When pass-through mode is enabled, triggers are passed through immediately and initiate the delay.
When disabled, a trigger only initiates a delay.
Example
trigger.timer[1].passthrough = true Enables pass-through mode on trigger timer 1.
Also see
trigger.timer[N].reset() (on page 7-211)
trigger.timer[N].reset()
This function resets some of the trigger timer settings to their factory defaults.
Type TSP-Link accessible Affected by Where saved Default value
Function Yes
Usage
trigger.timer[ N ].reset()
N Trigger timer number (1 to 4)
Details
The
trigger.timer[ N ].reset()
function resets the following attributes to their factory defaults:
•
trigger.timer[ N ].count
•
trigger.timer[ N ].delay
•
trigger.timer[ N ].delaylist
•
trigger.timer[ N ].passthrough
•
trigger.timer[ N ].stimulus
It also clears
trigger.timer[ N ].overrun
.
Example
trigger.timer[1].reset() Resets the attributes associated with timer 1 back
to factory default values.
Also see
trigger.timer[N].count (on page 7-207)
trigger.timer[N].delay (on page 7-208)
trigger.timer[N].delaylist (on page 7-208)
trigger.timer[N].overrun (on page 7-210)
trigger.timer[N].passthrough (on page 7-210)