manualshive.com logo in svg

Tektronix DC503a, Инструкция по эксплуатации, Страница: 287 / 300

Поделиться
Скачать
Tektronix DC503a Скачать руководство пользователя страница 287

TM 9-6625-474-14&P-3

e. Column 5, Tools and Test Equipment.  Column 5 specifies, by code, those common tools sets (not

individual tools) and special tools, TMDE, and support equipment required to perform the designated function.

f. Column 6, Remarks.  This column shall, when applicable, contain a letter code, in alphabetic order, which

shall be keyed to the remarks contained in Section IV.

B-4. EXPLANATION OF COLUMNS IN TOOL AND TEST EQUIPMENT REQUIREMENTS, SECTION Ill.

a. Column 1, Reference Code. The tool and test equipment reference code correlates with a code used in the

MAC, Section Ill, Column 5.

b. Column 2, Maintenance Category.  The lowest category of maintenance authorized to use the tool or test

equipment.

c. Column 3, Nomenclature.  Name or identification of the tool or test equipment.

d. Column 4, National Stock Number.  The National Stock Number of the tool or test equipment.

e. Column 5, Too/Number.  The manufacturer’s part number

B-5. EXPLANATION OF COLUMNS IN REMARKS, SECTION IV.

a. Column 1, Reference Code.  The code recorded in Column 6, Section Il.

b. Column 2, Remarks.  This column lists information pertinent to the maintenance function being performed

as indicated in the MAC, Section Il.

Содержание DC503a













































































































































































































































































































Отзывы:

Нет отзывов