manualshive.com logo in svg

Tektronix DC503a, Инструкция по эксплуатации, Страница: 205 / 300

Поделиться
Скачать
Tektronix DC503a Скачать руководство пользователя страница 205

TM 9-6625-474-14&P-3

Fig. 2-6. Illustration of CH A events counted from portion of CH A signal pulses during the counter gate open time (controlled by
CH B signal).

In the Ratio A/B mode, the frequency of the signal

applied to Channel A is divided by the frequency of the
signal applied to Channel B, and the resultant ratio is
displayed.

Triggering.  The operation of Channel A and Channel B

trigger controls is the same as for frequency and period

measurements. Set the trigger controls as follows:

1.

2.

3.

Go to the FREQUENCY A mode and adjust the
Channel A trigger controls for a normal frequency
measurement.

Go to the PERIOD B mode and adjust the Channel B
trigger controls for a normal period measurement.

Leaving the Channel A and Channel B trigger

controls as they are, gotothe RATIO A/B mode. The
correct ratio should be displayed.

Resolution.  The AVGS/TIMING switch, which controls

the number of averages of the Channel B signal, may now

be set to display maximum resolution. For most

measurements, the smallest number of averages that
produces a useful number of digits should be considered.

TIME MANUAL MODE

This mode is a manual analog of the TIME A - B mode.

In this mode, only the AVGS/TIMING switch and
START/STOP switch affect the display.

Starting and Stopping.  The TIME MANUAL mode may

bethought of as a “stop-watch” type of operation. With the
FUNCTION switch inthe TIME MANUALposition (and the
internal jumper properly positioned), the display starts
counting time-base pulses when the START/STOP switch
is depressed. It will continue to count and display the
accumulated total until the START/STOP switch is releas-
ed. The last count will then be held in the display until
another START command is given (in which case the
count will again advance), or other controls are actuated.

Pressing the RESET button will return the display to zero.

Changing the setting of the AVGS/TIMING switch will
change the frequency of the time-base pulses being
counted and reset the display to zero. The start/stop
function can also be performed remotely via the rear
interface connections.

Содержание DC503a













































































































































































































































































































Отзывы:

Нет отзывов