Tektronix AFG1000 Series, Руководство пользователя

Страница: 50 / 78

AFG1000 Series Arbitrary Function Generator Programmer Manual 41
Command Descriptions
Arguments <frequency>::=<NRf>[<units>]
where:
<NRf> is the hop frequency.
<units>::=[Hz | kHz | MHz]
Returns
<frequency>
Examples
SOURce1:FSKey:FREQuency 1.0MHz
sets the hop frequency of CH 1 FSK modulation to 1.0 MHz.
[SOURce[1|2]]:FSKey:INTernal:RATE
This command sets or queries the internal modulation rate of FSK modulation
for the specified channel. Use this command when the internal modulation
source is selected.
Conditions For the AFG1022, use
[SOURce1]
. Modulation, sweep, and burst conditions do
not apply to CH2 for the AFG1022.
Group
Source
Syntax
[SOURce[1|2]]:FSKey:INTernal:RATE
{<rate>|MINimum|MAXimum}
[SOURce[1|2]]:FSKey:INTernal:RATE
? {MINimum|MAXimum}
Arguments <rate>::=<NRf>[<units>]
where:
<NRf> is the modulation rate.
<units>::=[Hz | kHz | MHz]
Returns
<rate>
Examples
SOURce1:FSKey:INTernal:RATE 50Hz