Specifications
10
A6304XL Instructions
Table 4: Certifications and Compliances
EC Declaration of Conformity –
Low Voltage
Compliance was demonstrated to the following specification as listed in the Official Journal of the
European Communities:
Low Voltage Directive 73/23/EEC
EN 61010-1:1993
Safety requirements for electrical equipment for measurement,
control, and laboratory use
EN 61010-2-032:1995
Particular requirements for hand-held current clamps for electrical
measurements and test
Approvals
UL3111-1 – Standard for electrical measuring and test equipment
CAN/CSA C22.2 No. 1010.1 – Safety requirements for electrical equipment for measurement,
control and laboratory use
IEC1010-2-032 – Safety requirements for electrical equipment for measurement, control, and
laboratory use
Installation Category Descriptions
Terminals on this product may have different installation category designations. The installation
categories are:
CAT III
Distribution-level mains (usually permanently connected). Equipment at this level is
typically in a fixed industrial location
CAT II
Local-level mains (wall sockets). Equipment at this level includes appliances, portable
tools, and similar products. Equipment is usually cord-connected
CAT I
Secondary (signal level) or battery operated circuits of electronic equipment
