796 Tek Drive, Crystal Lake, IL 60014 USA
+1 847 857 6076
+1 847 655 6147
www.tek-trol.com
Quick Start Guide
1. Before you begin
2. Unpack
3. Dimensional Drawing
This guide provides basic guidelines to assist you in quickly getting started.
Installation of the transmitter in an explosive environment must be in accordance with the
appropriate local, national, and international standards, codes, and practices. Review the
approvals section of the 3800E Multivariable Pressure Transmitter reference manual for any
restrictions associated with a safe installation.
Do not remove the transmitter covers in explosive environments when the circuit is live.
Make sure the transmitter is installed by qualified personnel and in accordance with applicable
codes of practice.
Tek-DP 1610D Integral Orifice Assembly
Fig 1: Assembly without Associated Piping
Fig 2: Assembly with Associated Piping
- 900 Flange Class
