Tektite Toro Reelmaster 5010 Series, Руководство по установке

Страница: 5 / 19

4. Take the right front bracket support and position it under the front right corner of the
operator platform. Using the provided 3/8” x 1 ½” hex bolts and flange nuts, attach the bracket
to the platform. See photo below of bracket installed.
5. Take a lifting strap and loop around the front and rear light bars. Attach to a hoist or forklift
ensuring that ROPS is balanced front to back. Lift up and over of the machine.
6. Slowly lower the ROPS onto the machine platform. NOTE: there is a cable on the right side of
seat that is very tight to the rear mounting bracket. Ensure that this capable is not pinched, it is
designed to fit with the mounting bracket.
June 2021© Toro Reelmaster 5010 Series ROPS Installation Manual