| RENT: OPALED |
| OPALED |
via GIUSEPPE DI VITTORIO 9
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSET.IT
via NAZARIO SAURO 13/A
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSETRENTAL.IT
TekSet
Rental S.r.l.
RGB DMX POWER SUPPLY 2G
rev: 04
19
www.mbnled.com
MAIN MODE – SINGLE
Here various stand alone programs can be selected.
On the display you can see the current program number, maximum number of steps
and the current step number. ‚S’ and ‚W’ are meaning SPEED time (speed of colour
change) and WAIT time (delay between steps). The SPEED time indicates the
changing speed from one step to the next one. The wait time indicates the delay
time, until the change to the next step is performed. During the wait time the original
channel values remain unchanged.
By pressing the ENTER button several parameters can be selected: program
number, SPEED time and WAIT time. The selected parameter flashes and can be
modified with the UP-DOWN buttons.
You can leave this mode at any time without saving changes by pressing the ESC
button.
If DMX priority is activated (see: SETUP MENU – DMX PRIORITY), the current
program is overwritten by the DMX signal. As soon as the DMX signal stops, the
selected program will automatically be resumed.
MAIN MODE – MASTER
Same functions and operation as in single mode, but an additional DMX signal for the
slave units is generated (master-slave mode). Up to 19 slave devices with different
DMX addresses can be controlled. The number of slave devices with identical DMX
address is virtually unlimited.
RGB DMX POWER SUPPLY 2G
rev: 04
20
www.mbnled.com
MAIN MODE – SETUP
Here you can adjust additional parameters.
Setup menu:
CHANNELS
MINIMUM
MAXIMUM
DEFAULT
LINEAR CHARACTERISTIC
WHITE BALANCE
OPUTPUT FREQUENCY
KONFIGURATION
DMX PRIORITY
OVERHEAT PROTECTION
INFRARED INPUT
OPTIONS
LANGUAGE
DISPLAY BRIGHTNESS
FACTORY SETTINGS
INFORMATIONS
SETUP – CHANNELS – MINIMUM
Minimum channel intensity adjustment (0-127)
Here you can enter the minimum value for the specific channel. The channel output
will not get below the adjusted minimum value.
Press the UP-DOWN buttons to select the desired minimum value.
SETUP – CHANNELS – MAXIMUM
Maximum channel intensity adjustment (128-255)
Here you can enter the maximum value for the specific channel. The channel output
will not get above the adjusted maximum value.
Press the UP-DOWN buttons to select the desired maximum value.
