| RENT: OPALED |
| OPALED |
via GIUSEPPE DI VITTORIO 9
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSET.IT
via NAZARIO SAURO 13/A
20037 PADERNO DUGNANO (MI) ITALY
CONTACT US: (+39) 0291082905 - WWW.TEKSETRENTAL.IT
TekSet
Rental S.r.l.
RGB DMX POWER SUPPLY
Version 6.0
22
www.mbnled.com
SETUP MENU MODE DISPLAY
Here you can adjust the brightness of the display from 10 -100%. Press the ENTER
button and the current brightness is indicated on the display.
The display brightness can now be adjusted with the UP and
DOWN buttons.
Press the ENTER button to save the changes. You can leave this mode at any time
by pressing the ESC button without saving any changes.
SETUP MENU MODE RANGE
Here you can change the display range of the indicated intensities (% or bit). Press
the ENTER button and the current setting is indicated on the display.
The selected range is %, channel levels are indicated on the
display from 0-100%. Press the UP and DOWN buttons to change the setting.
The selected range is bit, channel levels are indicated on the
display from 0-255. Press the UP and DOWN buttons to change the setting.
Press the ENTER button to save the changes. You can leave this mode at any time
by pressing the ESC button without saving any changes.
SETUP MENU MODE TIME OPERATING TIME
Here you can read, how many hours the device was in operation.
The blinking point shows the seconds.
Press the ESC button to leave this mode.
RGB DMX POWER SUPPLY
Version 6.0
23
www.mbnled.com
SETUP MENU MODE RESET
Here you can reset all settings to the factory preset parameters. Press the ENTER
button and the display begins to blink. Now you have to press the ENTER button
once more and keep it pressed for five seconds until the blinking stops. After this
procedure the device is reset to the initial factory settings.
SETUP MENU MODE SOFTWARE VERSION
The last digit indicates the current software version number.
Versions of the MBNLED RGB DMX POWER SUPPLIES:
5V 50 Watts Common Anode
5V 50 Watts Common Cathode
5V 90 Watts Common Anode
5V 90 Watts Common Cathode
12V 90 Watts Common Anode
12V 90 Watts Common Cathode
12V 180 Watts Common Anode
12V 180 Watts Common Cathode
12V 300 Watts Common Anode
12V 300 Watts Common Cathode
24V 90 Watts Common Anode
24V 90 Watts Common Cathode
24V 180 Watts Common Anode
24V 180 Watts Common Cathode
24V 300 Watts Common Anode
24V 300 Watts Common Cathode
MBN Eventproducts GmbH
Engelschalkstraße 5, D-86316 Friedberg
Tel. +49 821 60099-0, Fax +49 821 60099-99
E-Mail: [email protected]
Internet: www.mbngermany.de
RGB DMX POWER SUPPLY
Version 6.0
23
www.mbnled.com
SETUP MENU MODE RESET
Here you can reset all settings to the factory preset parameters. Press the ENTER
button and the display begins to blink. Now you have to press the ENTER button
once more and keep it pressed for five seconds until the blinking stops. After this
procedure the device is reset to the initial factory settings.
SETUP MENU MODE SOFTWARE VERSION
The last digit indicates the current software version number.
Versions of the MBNLED RGB DMX POWER SUPPLIES:
5V 50 Watts Common Anode
5V 50 Watts Common Cathode
5V 90 Watts Common Anode
5V 90 Watts Common Cathode
12V 90 Watts Common Anode
12V 90 Watts Common Cathode
12V 180 Watts Common Anode
12V 180 Watts Common Cathode
12V 300 Watts Common Anode
12V 300 Watts Common Cathode
24V 90 Watts Common Anode
24V 90 Watts Common Cathode
24V 180 Watts Common Anode
24V 180 Watts Common Cathode
24V 300 Watts Common Anode
24V 300 Watts Common Cathode
MBN Eventproducts GmbH
Engelschalkstraße 5, D-86316 Friedberg
Tel. +49 821 60099-0, Fax +49 821 60099-99
E-Mail: [email protected]
Internet: www.mbngermany.de
