INSTALLATION
Installation Guide
16
IDE Activity LED (JP2)
Hook the IDE LED lead to this connector, with the RED lead corresponding to
Pin-1.
Soft Power Switch (JP9)
Connects to the Power Switch featured on ATX case designs. This switch must be
hooked up before the system can be powered on, unlike traditional “Baby-AT”
designs where the power switch is located on the Power Supply itself.
Note
: Under the following two conditions, you have to press and hold the switch
for longer than 4 seconds to power off your system, regardless of the “
Soft-Off by
PWRBTN
” setting in the BIOS.
•
Shortly after the system is powered on, when the BIOS message is not yet
appear.
•
When CPU hangs.
