INSTALLATION
Installation Guide
15
System Function Connector Block (J11)
Pins [3 & 5] Turbo LED switch
- The Turbo function is not supported by this
mainboard. Therefore, the Turbo LED will always remain lit as long as the system
power is on.
Pins [7 & 9] SMI suspend switch lead
- If your system’s case has a suspend
switch, hook the lead from the switch to pins 7 & 9. A suspend switch is used to
save electricity by putting the system into a suspend mode when the computer is
not being used. This switch could also be used by the Turbo switch on the front of
the system, since this mainboard does not support that function. For this switch to
be functional, it must first be enabled in the Power Management Setup in the BIOS
Setup utility.
Pins [17 & 19] Reset switch lead
- Connects to the Reset Switch lead from the
system’s case. The reset switch is used to “cold-boot” the system without actually
turning off the power, reducing wear and tear on the power supply.
Pins [2, 6, 8 & 10] Keyboard lock switch lead
– Pins 2 & 6 connect to the power
LED from the system’s case. Pins 8 & 10 connect to the case-mounted keylock
switch.
Pins [14 & 20] Speaker connector
- Connects to the Speaker lead from the
system’s case.
