Tekram Technology P6B40D-A5 Скачать руководство пользователя страница 36 | Manualshive

Страница: 36 / 51

background image

MAINBOARD BIOS SETUP

MAINBOARD BIOS SETUP

P6B40D-A5 User’s Manual

P6B40D-A5 User’s Manual

36

36

Choices are C800, CC00, D000, D400, D800, DC00.

Used MEM length -

Select a length for the memory area specified in the previous field.

This field does not appear if no base address is specified. Options are 8K, 16K, 32K, 64K.

SYMBIOS SCSI BIOS -

When set to

Auto

(Default), the system will automatically sense

the presence of any SCSI adapter that uses a Symbios SYM53C8XX SCSI chip:

If the SCSI adapter installed

has

its own

BIOS on board:

The on-board SCSI BIOS will not be loaded.
The adapter’s own SCSI BIOS will be used.

If the SCSI adapter installed

doesn’t have

its own BIOS and the card uses or is
compatible with the SYM53C8XX chip:

The on-board SCSI BIOS will load and
control the SCSI adapter.

*Disabling

the onboard SCSI BIOS prevents it from being active in any way.

PCI Latency Timer -

This option sets latency of all PCI devices on the PCI bus. The

settings are in units equal to PCI clocks. Available settings are 0 ~ 248. The default is 80.

Load BIOS Defaults

Loads “Fail Safe” settings into the BIOS Setup program. These options are designed to slow
the system down for troubleshooting purposes. To load the default values, highlight this
option and press [ENTER]. Enter “Y” in the confirmation screen and press [ENTER] again.
User-defined options in the

Standard CMOS Setup

are not affected.

Load Setup Defaults

Loads the default values for best system performance into the BIOS Setup program. To load
the default values, highlight this option and press [ENTER]. Enter “Y” in the confirmation
screen and press [ENTER] again. User-defined options in the

Standard CMOS Setup

are

not affected.

«
...
34
35
36
37
38
...
»

Содержание P6B40D-A5




















































Отзывы:

Нет отзывов

Похожие инструкции для P6B40D-A5

RTKA223012DR0050BU

Бренд: Renesas Страницы: 14

NCN8024GEVB Series

Бренд: ON Semiconductor Страницы: 5

Бренд: Supero Страницы: 80

Бренд: ICP Страницы: 50

Бренд: TYAN Страницы: 96

Бренд: BESTEK Страницы: 13

Бренд: Linear Technology Страницы: 6

Blood-Iron P45 Elite Series

Бренд: LanParty Страницы: 134

KXTJ3-1057-EVK-001

Бренд: Rohm Страницы: 3

Бренд: Daewoo Страницы: 46

Бренд: Acconeer Страницы: 14

NCP45491PMNGEVB

Бренд: ON Semiconductor Страницы: 9

Бренд: ASROCK Страницы: 160

Бренд: JETWAY Страницы: 58

Бренд: AXIOMTEK Страницы: 72

Бренд: TYAN Страницы: 81

Бренд: DFI Страницы: 107

Бренд: Intel Страницы: 92

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды