8
3.1 Connections, Parts and Layout
3.1.1 Relay connections and remote control
WORK-relay
: relay is in normal closed position, when the CBU is operating.
BATT-relay
: relay is in normal closed position, when the CBU is in battery mode.
ERROR-relay
: relay is in normal closed position, when there is an internal fault in the CBU
(luminaire error does not change the relay position)
Remote control
: When a relay connected to this is in normal open position, the CBU goes into
battery mode.
3.1.2 Connection to Teknoware Advanced Monitoring (ACM)
If you are using the Teknoware Advanced Central Monitoring (ACM) -software, you can
connect the TKT24 CBU directly to the modem. Give the CBU a individual local address during
commissioning. See details from Chapter 7.7.6 Local Address.
