Teknoloji Ekibi Delta Pulse 3S Plus, Руководство пользователя

Страница: 15 / 22

15
7. The capture will be performed in the same window the length and width of the field where information must be
entered.
8. Must be entered step size at the same window. Program will calculate sample periods and sample ways with
using size of the area and step size. Step size is choosible due to user need. But our advice is use same dimensions
with coil size.
9. The above settings are done, it should be located at the lower left side of the display area. In the process of the
shooting area of the imaging start shooting left six, finishing the shot on the right is the shadow. How to do the
sampling during shooting are shown in Figure 8. When switched to the lower left corner of the shooting settings
on the screen shot select the OK button. An image comes on the screen as shown in Figure 9 The result of this. The
region circled in red here your shots during a match the nth sample path and in that path that were in the shows.
The Cancel button also at the end of the path next to the road under the direction of the
Direction Change! In the
form of a warning the next part is located. Point to note here is that the sample was taken and how many how
many ways change the way and be known! The other way to pass an alert must be known. When these guidelines
are followed tread a path as shown in Figure 8. The 3D button on the main unit button during shooting will be
used as the sampling detector. During shooting, when each button is pressed, the image on the tablet screen from
the current position to the corresponding location in the received data by adding the attraction takes place in a
concurrent manner. The final version of the image on the screen will appear when shooting is complete.
Figure 8