Tekno Point DKV Series, Руководство по установке

Страница: 37 / 48

Check before use
Maintain after use
D
E
Clean and care
-1- Take down the air filter
At the slot of surface panel to open an angle, pull theair filter
downward and take it out.
-2- Cleaning
To clean the dust adhering to the filters, you can eitheruse a
vacuum cleaner, or wash them with warm water (the water
with the neutral detergent should below 45
C). When the
filters are very dirty (such as oil stain), and dry it in the shade.
NOTE: Never use water above 45° to wash, or it cancause
deformation or discoloration. Never partch it byfire, or can
cause a fire or deformation.
-3- Reinsert the filters
Reinsert the filters along with the arrow head, then coverthe
surface panel and clasp it.
-1- Be sure that nothing obstructs the air outlet and intake vents.
- 2- Check that whether ground wire is properly connected or not.
-3- Check that whether the batties of air conditionearechanged or
not.
-4- Check that whether the installation stand of the otdoorunit is dam-
aged or not. If damaged, please contact the dealer.
-1- Turn main power off.
-2- Clean the filter and indoor and outdoor units' bodies.
-3- Repaint the rubiginous place on the outdoor unit to prevent it from spreading.
37