TEKNIX T55L2W, Инструкция по эксплуатации, Страница: 11 / 23

11
3. Level ground
Place the larder on a solid and flat ground (floor) to keep it stable, or else it will give rise
to vibration and noise.
Unobstructed ventilation shall be maintained around the appliance or in an
embedded structure.
Preparations for use
1. Standing time
After the larder is properly installed and well cleaned, do not switch it on immediately.
Make sure you allow a minimum of 4 hours before turning on the power of the larder .
2. Cleaning
Before use ensure you cleans the internal compartments and all shelves and accessories
with a soft cloth.
3. Power-on
Insert the plug into the power socket to start the compressor. After 1 hour, open the larder
door, if the temperature inside the larder compartment drops obviously, it indicates the
refrigeration system is working normally.
4. Storage of food
After the larder runs for a period of time, the internal temperature of the larder will be
automatically controlled according to the user’s temperature setting. After the larder is
fully cooled, put in foods, which usually need 2~3 hours to be fully cooled. In summer,
when the temperature is high, it takes more than 4 hours for the foods to
be fully cooled (Try to open the larder door as less as possible before the internal
temperature cools down).
If the larder is installed in a moisture filled room, make sure to c heck whether the ground wire
and leakage circuit breaker are normal. If vibration noises are produced due to the larder
making contact with the wall, or if the wall gets blackened by air convection around the
compressor, move the larder away from the wall. Setting up the larder may cause jamming
noise or image chaos to mobile phones, fixed-line telephone , radio receiver, television sets
surrounding it, so try to keep the refrigerator as far away as possible from these items.