TEKNIX T55L2W, Инструкция по эксплуатации

Страница: 10 / 23

1 0
If you require any technical guidance or find that the product is not operating as intended, please see the
Troubleshooting
section of this manual
III. Preparations for use
Installation location:
1. Ventilation condition
When installing your larder , ensure it is in a well ventilated location. Do not install the
larder near any heat source such as a cooker. Avoid locating the larder in direct sunlight,
this will ensure you reduce the energy consumption of the appliance. Do not locate the
larder in a damp place, this will prevent the larder from rusting and leaking electricity.
The result of the total space of the room in which the refrigerator is installed being divided
by the
larder charge amount of the larder shall not be less than 8 g/ M3. Note: The
amount of refrigerant charged for the larder can be found on the nameplate.
2. Heat dissipation space
When your larder is installed and running, it will give off heat to it’s surroundings.
Therefore, a minimum of 300mm free space should be at the top of the unit, minimum of
100mm on both sides, and a minimum of 50mm at the back of the refrigerator.
Dimensions in mm:
W D H A B C(°) E F
1428 1 566 10 11 1107
1 25
50 100
Note: Figure 1, Figure 2 only illustrate the space demand of the product.
545