TEKNIHALL AF2, Оригинальное руководство по эксплуатации

Страница: 47 / 128

15
NOTE!
Risk of damage!
The fan and heating element are located at the top, inside in the slot
of the hot air fryer. Clean this area very carefully.
2. Wipe the inside and outside of the slide-in unit
1
and the draining
board
3
with a damp cloth.
Setting up and heating up the appliance for the first time
Set up the appliance on an easily accessible, level, dry, heat-resistant
appliance ensure a secure hold.
Maintain a minimum distance of 30 cm from the rear of the appliance
to other objects and at least 10 cm to each side.
1. First place the draining board
3
at an angle
into the base of the slide-in unit
1
(under
the lower screws) and then press it down.
Pay attention to the markings
1a
and
3a
.
2. Push the slide-in unit
1
with the
inserted draining board
3
into the
hot air fryer.
3. Connect the power plug to a socket.
All symbols in the control panel
7
will
10
will
remain active.
4.
200°C (392°F) and the time min (15) will be shown.
1a
1
3a
3