manualshive.com logo in svg

TEKNA 702736, Технический бюллетень, Страница: 4 / 16

Поделиться
Скачать
TEKNA 702736 Скачать руководство пользователя страница 4

TB-1016-A

4

Construction Features

1 Air Cap (nickel plated brass for long durability)
2 Air Cap Retaining Ring (allows easy rotation of air cap)
3 Fluid Nozzle (not visible, ideal for automotive topcoat systems)
4 Fluid Needle (not visible)
5 Fluid Inlet (3/8 BSP thread – accepts TEKNA & DeVilbiss cups)
6 Air Inlet (universal thread, accepts G 1/4 & 1/4 NPS)
7 Self Adjusting Needle Packing (packing not visible, for long packing life)
8 Trigger (ergonomic for comfort)
9 Trigger Stud & Screw (easy replacement design)

10 Fan Air Adjustment (stepless regulation for flat to round spray)
11 Fluid Adjustment (stepless regulation of fluid volume)
12 Removable Air Separator (not visible, for long gun service life)
13 Interchangeable Colour ID System (4 coloured rings supplied)
14 Forged gun body (ergonomic, good looking & durable, easy to clean)
15 900cc Aluminium Cup (easy clean) (shown) or 20 oz. Acetal Cup (waterbourne) (not shown)
16 Push On Lid w/Drip Free Vent (disposable/easy clean design) (aluminum cup) or screw-on lid w/vent (acetal Cup)
17 Air Valve (design offers low pull force & low pressure drop)
18 Gun acceptable for waterborne and solvent borne applications

Materials of Construction

Gun Body

Anodized aluminium

Air Cap

Nickel plated brass

Fluid Nozzle, Fluid Needle, Fluid Inlet, Trigger Stud

Stainless steel

Air Separator, Air Cap Retaining Ring, Knobs

Anodized aluminium

Springs, Clips, Screws

Stainless steel

Seals, Gaskets

Solvent resistant

Trigger

Chrome plated steel

Handle Plug, Air Inlet, Body Bushing, Spreader Valve Body, Air Valve Nut

Chrome plated brass

Air Valve Assembly

Stainless steel, acetal

Specifications & Technical Data

Air Supply Connection

Universal 1/4" BSP and 1/4" NPS

Maximum Static Air Inlet Pressure

P1 = 12 bar (175 psi)

Nominal Gun Air Inlet Pressure for HVLP Models (with gun triggered)

1.8 bar (26 psi)

Nominal Gun Air Inlet Pressure for High Efficiency Models – (with gun triggered)

1.5 bar (22 psi) (for compliance)

Air Consumption

See Chart 1 on page 11

Fluid Supply Connection

3/8" BSP

Service Temperature

0 to 40°C (32 to 100°F)

Gun Weight (gun only)

478g (16.9 oz.)

1

2

3, 4, 12

5

16

15

9

10

11

14

13

6

17

8

7

Содержание 702736

















Отзывы:

Нет отзывов