2
Press either of the sensor buttons asso-
ciated with the heating element with
which you want to use the timer. After
doing so, the light corresponding to the
chosen heating element (11) will turn on
and a blinking
will appear in its power
level indicator. The time indicator of the
clock (8) will show a blinking
00
.
3
Choose a timer time for the chosen hea-
ting element. This can be done using the
sensor buttons
or
(14/15) of the
device. The increase or decrease will be
done minute by minute, which allows for
a time that can vary between 1 and 99
minutes.
The time will be set after 5 seconds since
the last pulsation on the sensor buttons of
the clock. Afterwards, the digits will stop
blinking. If you have not chosen a value or
if you touch a sensor button other than
those indicated
and
(14/15), the
timer will turn off.
Once the chosen time has passed, the
heating element where the timer was used
will disconnect and the clock will emit a
series of beeps for 1 minute. To stop the
beeping, touch any of the sensor buttons.
Modifying the programmed time
Once the timer has been set for a heating
element, the timer time may be changed if
desired.
1
Touch the sensor button of the clock
or
(14/15) and choose the heating
element whose timer time you want to
change by touching any of its sensor
buttons.
2
The timer indicator will then show you in
a blinking manner the remaining time of
the timer. The power level indicator of
the heating element will show a blinking
. At that time, you can change the timer
time by using the sensor buttons
and
(14/15) of the clock.
The time will be set after 5 seconds have
passed since the last pulsation on the sen-
sor buttons of the clock or by touching the
sensor button of any heating element
other than the heating element correspon-
ding to the timer. Afterwards, the digits will
stop blinking.
If, after 5 seconds have passed the mar-
ked time is still
00
, the timer has not been
set for this heating element. The indicator
light will turn off and the
will disappear.
Setting the timer for a new heating ele-
ment
It is possible to set the timer for more than
one heating element at a time. To do so,
repeat the steps in the section "Setting the
timer for one heating element".
When the timer is being used for more
than one heating element, the time indica-
tor (8) will alternately show the remaining
time for each one of the heating elements.
The value shown by the indicator corres-
ponds to the heating element whose
power level indicator is showing a blinking
and there is a light turned on next to the
indicator of the timed heating element.
Quickly turning off timer
It is possible to cancel the timer for a hea-
ting element in various ways:
* Simultaneously press the sensor buttons
and
(14/15) del reloj. of the clock.
By doing so, the timer of the chosen
heating element (
blinking) will turn off.
* Turn off the heating element. The corres-
ponding heating element will be cancelled.
GB
68
Содержание VI TC 30 2I
Страница 2: ...2...
