EN -10-
Accessories
The Icematic
•
Pull the lever towards you and remove the ice maker
tray
•
Fill with water to the marked level
•
Hold the left end of the lever and set the ice-tray on
the icebox
•
When ice cubes have formed, twist the lever to drop the ice cubes into the icebox.
!
Do not fill the icebox with water in order to make ice. It will break.
Note:
• Do not fill the icebox with water in order to make ice. It can be broken.
• The movement of the ice maker may be difficult while the refrigerator is running. In such
a case should be cleaned by removing the glass shelves.
Removing the icemaker
•
Take out of the freezer glass shelves
•
Remove the icemaker by dragging left or
right on the shelf.
You can remove the icemaker to use a larger
volume of the freezer compartment.
(In some models)
Ice tray
•
Fill the ice tray with water and place in
freezer compartment.
•
After the water completely turned into ice,
you can twist the tray as shown below to
get the ice cube.
(In some models)
Zero Box
Keeping food in the zero box compartment instead of the
freezer or refrigerator compartment allows food to retain
freshness and flavour longer, while preserving its fresh
appearance. When the zero box tray becomes dirty, remove
it and wash it with water.
(Water freezes at 0°C, but foods containing salt or sugar
freeze at temperatures lower than that)
Normally the zero box compartment is used to store raw
fish, lightly pickled food, rice, etc...
Do not put foods you want to freeze or ice trays onto
the zero box.
Removing the zero box
•
Pull the zero box towards you by sliding it on the rails.
•
Pull the zero box up from the rail and remove it from
the fridge.
(In some models)
Содержание RTF 15810 SS
Страница 1: ...RTF 15810 SS ...
Страница 148: ...AR 2 حريق لالشتعال قابلة مواد حريق نشوب خطر تحذير ...
