Teka LMD 501 Скачать руководство пользователя страница 7 | Manualshive

Страница: 7 / 22

background image

3. Safety instructions

3.1. Definition of the hazard symbols

The device is constructed according to the state of the art and the recognised safety regulations.
Nevertheless, during use threats to life and limb of the user or other persons may arise. The impairment
of the machine or other property are also possible. In these instructions we warn by using corresponding
indications.

WARNING

WARNING

These instructions are made in case of risks that can lead to injury or death.

CAUTION

CAUTION

These instructions are made in case of risks that can lead to injury.

NOTICE

NOTICE

These instructions are made in case of risks that can lead to material damages.

Information notes are no hazard warnings; they call attention to useful information.

3.2. General safety instructions

WARNING

Dangers arising from improper use / unauthorised operations

.

The operator must ensure that their authorised personnel are familiar with all the safety
indications in this manual in advance. The operator is responsible for ensuring that all work
is carried out by authorised and qualified personnel. We therefore recommend using the
training protocol on the last page for that purpose (see chapter “Training protocol”).
Laymen are allowed to operate the device after having received the necessary instructions.
But they are not allowed to carry out any installation, repair or maintenance work.

Dangers arising from fire.

In case of fire, if possible, switch the unit immediately off or disconnect it from the power
supply. Fire extinguishing measures which the operator is obliged to determine beforehand
must be initiated immediately.

WARNING

Dangers arising from electricity.

The operator must ensure that electrical plants and equipment are only built, modified and
maintained by a qualified electrician or under the direction and supervision of a qualified
electrician. Do not work on components if you are not sure that these are disconnected. If
necessary, disconnect the device from the electric power supply and secure it against
unauthorized restarting.

BA_LMD-501_220127_EN

7

27.01.2022

«
...
5
6
7
8
9
...
»

Содержание LMD 501























Отзывы:

Нет отзывов

Похожие инструкции для LMD 501

Бренд: Vivo Страницы: 8

Бренд: U.S. Products Страницы: 24

Trubolava facile 35

Бренд: Cimel Страницы: 6

Бренд: Hammerhead Страницы: 27

Бренд: Taski Страницы: 21

Бренд: Nilfisk-Advance Страницы: 132

Бренд: Topfloor Страницы: 17

Бренд: Central Pneumatic Страницы: 16

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды