2
PLACE OF INSTALLATION
ABOVE A DRAWER
The electronic circuits of
the induction hob must
be cooled by a current of
fresh air as shown in the
diagram,and the points
below must be carefully
complied with.The
greater the distance
between the hob and the
cupboard underneath
it,the better the hob will
function.
IMPORTANT
Your induction hob needs an air inlet at the rear and an air outlet at the front.
ABOVE A CUPBOARD WITH DOOR
When the air outlet is underneath the hob:
ldeally, an air outlet grille should be
placed between the hotplate and the
cuboard door.It will be easy to install if the
cross bar is small.
If the cross bar is rectangular or the
hotplate is closed off,make a bevelled cut
to free the air outlet.
4
b
a
4.7cm min
S
A
N
IT
A
R
IO
9.5cm
10mm min
45°
