YOU NOTICE THAT
POSSIBLE CAUSES
WHAT SHOULD YOU DO
The induction hob is not
working. The pilot lights
on the keypad are all off
Check the state of the
electrical installation.
Check the fuses and
differential switches.
There is no electrical
supply to the appliance.
The supply or
connection is defective.
The power display on the
keypad continue to flash
and show E0 when the
appliance is functioning.
The pan being use is not
suitable for induction
cooking.
Use a compatible pan.
pans can be tested with
the magnet.
The hob continues to
ventilate for several
minutes after switching
off.
The electronic circuits are
cooling down.
This is normal.
the fan keep running for a
few minutes after the unit
has been switched off
the electronics is cooling
down
this is a normal
occurrence
your hob makes faint
clicking noise when in
operation
this noise occurs when
the power is being
shared between two
induction coils
this is a normal
occurrence
your utensil creates
noise from vibrations
caused by induced
current
your utensil creates
noise during cooking
under high power this
phenomenon is normal
with some type of pots
and pans. There is no
danger for the hob
The power display on the
keypad continue to flash
and show E3 or E4 or E5
and shut off automatism
The appliance is work in
the danger state
Shut off the appliance
and open the unit again
after some time.
WHAT SHOULD I DO IF
The hob is not working
and a different message
appears.
The electronic circuit is
not working correctly.
Contact the after-sales
service.
11
