Teka HGR 650 230 NAT, Инструкция по эксплуатации

Страница: 9 / 31

shown in the figure, secure the oven to the kitchen unit with the
screws. Before Installation. Comments . To unpack the oven, pull
the tab located on the lower part of the box and to move it, hold
door handle . . A nichle is required in the kitchen unit as per the
dimensions shown on the figure, pro-viding a minumun depth of
580 mm.
To fit multifunction ovens in their locations, the back part of the
unit corresponding to The shaded area of fİgure 6, must not have
any projections (reinforcements, pipes, sockets, etc)
The adhesive used for the platic covering of kitchen furniture must
be able to withstand temperatures up to 58°C.
INSTALLING THE OVEN
For all ovens and after carrying out the electrical connection, 1
Introduce the oven into the kitchen unit, taking care not to trap the
cable, and not to put it on the upper part of the oven. 2 Fix the oven
to the unit by means of the 4 screws supplied via the holes that can
be seen when the door is opened. 3 Check that the oven housing is
not in contact with the sides of the unit and that there is at least
2mm separating the neighbouring units.
INSTALLATION SCHEME
: It is fundamental to ensure a proper air
circulation to the back side of the appliance; The cut-off dimensions
must be observed. If needed, there can be larger cut-outs than what
indicated.