Teka HGR 650 230 NAT, Инструкция по эксплуатации, Страница: 20 / 31

The connection between the gas connection and thE pipe must be
made in one of the two following ways (see the drawing on bottom
page):
-using a connector without a sealing ring (the oven connector is
conical: ISO R 7)
-interposing the metal sealing ring provided.
ATTENTION
: when finished check that there are no gas leaks. Use
soap and water, or another liquid suitable for the purpose, to check
for gas leaks. Do not use a flame to search for gas leaks.
WARNING
: the use of flexible rubber tubing attached to the outlet
connector is prohibited because it cannot be inspected.
Adapting to the gas in use
: It is possible to use other types of gas
by adapting the burner adjusment as follows:
-Make sure that the oven is not connected to the electric power
supply.
-Open the oven door completely and remove the oven bottom.
Remove the burner by unscrewing its screw, then unscrew the
injector and replace it.
-Reassemble the burner in the oven and the oven bottom.