Teka FS3FFL90GGS/S, Инструкция по эксплуатации

Страница: 17 / 61

17
To change the sound level: touch the M key. On the display appears the writing: Ton.. followed by a number . Select
with the - key your favourite sound level .
Note: number 1 is referred to the highest sound level . The available levels are 3.
Attention: Power cut causes the l oss of any program, even the clock; that means the programmer will have to be set
again .
ELECTRONIC TIMER PROGRAMMER (Fig. 45)
Setting
Select a function by pressing the function button and set the required time with the +/- buttons.
+/- buttons
Pressing the “+” button increases the time set, pressing “-“ decreases it. The count-up and countdown speed increases the
longer the button is held in the appropriate position
Setting the time of day
Select the time of day function by pressing the duration and end time button together and set the time of day with the +/-
buttons.
Any programme which has been set is cancelled and the outputs switched on
Manual operation
Press duration and end time button together. The relay contacts will switch on. The “A” symbol will be erased, the pot symbol
illuminated. Any programme which has been set is cancelled.
Semi-automatic operation with cooking duration
Select the cooking duration function and set the required duration with +/- button. “A” and cookpot symbol appear. The relay
output becomes active. If time of day = cooking end time the relay output and the cookpot symbol are switched off.
The audible signal sounds. The symbol “A” blinks.
Semi-automatic operation with cooking end time
Select the cooking end time function and set the required duration with +/- button. “A” and cookpot symbol will appear. The relay
output becomes active. If time of day = cooking end time the relay output and the cookpot symbol are switched off.
The audible signal sounds and “A” blinks.
Fully automatic operation
Select the cooking duration function and set the required duration with +/- button. The “A” symbol appears. The relay is switched
on and the cookpot symbol appears. Select the cooking end time function and the earliest possible end time is displayed. Set
the required end time with the +/- buttons. The relay and the cookpot symbol are switched off.
The cookpot symbol appears again when time of day = the calculated start time.
After the automatic programme has ended, the symbol “A” blinks.
The audible signal is heard and the cook pot symbol and the relay are switched off.
Minute minder
Select the minute minder button and set required time with the +/- buttons. As the time set elapses the bell symbol is displayed.
After the time set has elapsed, the audible signal sounds.
Audible signal
The audible signal sounds at the end of a minute minder cycle or of a cooking programme for a period of 7 minutes. The signal
can be cancelled by pressing any function button. Pressing the “-“ button without having previously selected a function the
frequency of the signal changes. A selection from 3 possibilities can be made. The selected signal is audible as long as the time
the “-“button is pressed.
Programme start and verification
A programme which has been set is carried out after setting the time required. The “time to run” can be verified at any time by
selecting the appropriate function.
Setting error identification
The setting is correct if the time of day is in between the calculated cooking start and end times. If an error has been made, this
will be indicated by the audible signal and by the symbol “A” flashing. The faulty setting can be corrected by changing one or
both functions.
Cancelling programme
A programme can be cancelled by selecting the manual function. After a programme which has been set comes to an end, it is
automatically cancelled.
USING THE THERMOMETER (Fig. 46)
The cooker is fitted with a device to measure the temperature in the middle of the oven. This lets you check the temperature
inside the oven and adjust food cooking temperatures more accurately.
ELECTRIC OVEN
When you turn on the oven, the orange light comes on to indicate that the heating elements are working: The thermometer dial
will start to move towards the set temperature. The orange light will keeping coming on and off, indicating that the heating
elements are working to maintain the temperature inside the oven. The light may go off for a few minutes before the
thermometer has reached the temperature required. This is normal, because operation of the heating elements is regulated so
that heat is distributed properly inside the oven. Heat is optimally distributed inside the oven when the thermometer dial has
stopped. If the oven temperature drops or goes up, the thermometer dial will follow these variations in the same way. When the
oven is turned off, the temperature on the thermometer will slowly drop until it reaches room temperature.
NOTE: The temperatures on the knob are indicative. Follow the thermometer temperature for cooking.
GAS OVEN
When the oven is turned on, the burner will start working at the maximum and the thermometer dial will start to move towards
the set temperature. The flame may die down before the thermometer has reached the temperature required. This is because
burner power is reduced so that heat can be evenly distributed inside the oven. Heat is optimally distributed inside the oven
when the thermometer dial has stopped. When the oven is turned off, the temperature on the thermometer will slowly drop until
it reaches room temperature.