Teka EW 90 5G AI AL TR CI E1-ME Скачать руководство пользователя страница 6

Страница: 6 / 76

INSTALLATION

TECHNICAL INFORMATION

FOR THE INSTALLER

Installation, adjustments of controls and

maintenance must only be carried out by a

qualified engineer.

The appliance must be correctly installed in

conformity with current law and the

manufacturer's instructions.

Incorrect installation may cause damage to

persons, animals or property for which the

Manufacturer shall not be considered

responsible.

During the life of the system, the automatic

safety or regulating devices on the appliance

may only be modified by the manufacturer or

by his duly authorized dealer.

3) INSTALLING THE HOT PLATE

Check  that  the  appliance  is  in  a  good  condition
after  having  removed  the  outer  packaging  and
internal  wrappings  from  around  the  various  loose
parts.  In  case  of  doubt,  do  not  use  the  appliance
and contact qualified personnel.

Never leave the packaging materials
(cardboard, bags, polystyrene foam, nails, etc.)
within children’s reach since they could
become potential sources of danger.

The measurements of the opening made in the top of
the modular cabinet and into which the hot plate will
be  installed  are  indicated  in  either  fig.  7. Always
comply with the measurements given for the hole into
which the appliance will be recessed (see fig. 7 and 8).
The  filotop  model  needs  of  a  milling  on  the  plan
top of depth 3 mm, measures are shown in figures
10/A  and  10/B  of  next  page.  It  is  advisable  to

spread on the milled surface a layer of "primer"
anti-infiltration.

The  appliance  belongs  to  class  3  and  is
therefore  subject  to  all  the  provisions
established  by  the  provisions  governing  such
appliances.

4) FIXING THE HOT PLATE

The  hot  plate  has  a  special  seal  (in  the  case  of
filotop)  or  putty  (in  the  case  of  semifilo)  which
prevents  liquid  from  getting  into  the  cabinet.
Strictly  comply  with  the  following  instructions  in
order to correctly apply this seal:
- detach  the  seals  (or  putty)  from  their  backing,

checking that the transparent protection still
adheres to the seal (or putty) itself.

- Overturn the hot plate and correctly position seal

(or putty) “E” (fig. 9) under the edge of the hot
plate itself, so that the outer side of the seal (or
putty) perfectly matches the outer edge of the
hot plate. The ends of the strips must fit together
without overlapping.

- Evenly and securely fix the seal (or putty) to the

hot plate, pressing into place with the fingers and
remove the strip of protective paper from the seal
(or putty) and set the plate into the hole made in
the cabinet.

- To insert the hooks “G” into the fissures on the

bottom  and  rotate  them  according  to  the  arrow
indicationts.  To  insert  the  screw  “F”  into  the
bottom holes and turn thoroughly the screws “H”
on  the  hooks  holes  (see  the  sequence  on  the
next page).

- In order to avoid accidental touch with the

overheating  bottom  of  the  hob,  during  the
working,  is  necessary  to  put  a  wooden  insert,
fixed  by  screws,  at  a  minimum  distance  of  120
mm from the top (see fig. 7).

- To follow the installation measures shown in

figures 10/A, 10/B and 11/A, 11/B.

FIG. 7

FIG. 8

FIG. 9

IMPORTANT!
A  perfect  installation,  adjustment  or
transformation  of  the  cook  top  to  use
other  gases  requires  a  QUALIFIED
INSTALLER: a failure to follow this rule will
void the warranty.