Teka EW 90 5G AI AL TR CI E1-ME, Инструкции по установке и рекомендации по обслуживанию

Страница: 16 / 76

16
TECHNICAL DATA ON THE DATA LABEL
4 BURNERS
G 30 - BUTANE = 28 - 30 mbar
G 31 - PROPANE = 37 mbar
G 20 - NATURAL = 20 mbar

Qn Gas Natural = 6.95 kW

Qn GPL = 505 gr/h (G30)
496 gr/h (G31)
VOLTAGE = 220 - 240 V~
FREQUENCY = 50/60 Hz
5 BURNERS
G 30 - BUTANE = 28 - 30 mbar
G 31 - PROPANE = 37 mbar
G 20 - NATURAL = 20 mbar

Qn Gas Natural = 10.05 kW

Qn
GPL = 731 gr/h (G30)
718 gr/h (G31)
VOLTAGE = 220 - 240 V~
FREQUENCY = 50/60 Hz
TECHNICAL ASSISTANCE AND SPARE PARTS
Before leaving the factory, this appliance will have been tested and regulated by expert and specialized
personnel in order to guarantee the best performances.
Any repairs or adjustments which may be subsequently required may only be carried out by qualified
personnel with the utmost care and attention.
For this reason, always contact your Dealer or our nearest After Sales Service Center whenever repairs or
adjustments are required, specifying the type of fault and the model of the appliance in your possession.
Please also note that genuine spare parts are only available from our After Sales Service Centers and
authorized retail outlets.
The above data are printed on the data label put on the inferior part of the appliance and on the packing
label.
The above informations give to the technical assistant the possibility to get fit spare parts and a heaven-sent
intervention. We suggest to fill the table below.
MARK: ........................................................................
MODEL: ......................................................................
SERIES: ......................................................................