GB
13
TURNING ON THE APPLIANCE
Whenever you connect the hob to the
electrical mains for the first time, the lock
function will be activated. To deactivate
this function, see the section "Locking the
hob sensor".
1
Touch the on sensor button
(1) for at
least one second.
The next action must be taken within three
minutes; otherwise, the touch control panel
will automatically turn off.
IGNITING THE BURNERS
Once the touch control panel has been
activated by using the sensor button
(1), you can turn on the chosen burners.
To do so, please do as follows (see fig. 6):
1
Make sure that the knobs are in the
correct position.
2
Turn on the gas at the mains or turn the
gas cylinder tap.
3
Turn and put pressure on the burner
knob so that the gas ignites.
4
Place the knob in the desired position.
5
The burner selection light will go on.
The control panel has marked zones (A)
that indicate the control knob that corres-
ponds to each burner.
Use flat-bottomed cookware and make
sure that they sit squarely on the pan sup-
port, so that the cookware does not slip
when food boils (do not use cookware with
a concave or convex base).
If an error occurs while igniting
the burner, the burner will be deactiva-
ted after the safety time has elapsed (10
seconds).
These hobs may not be lit using
matches.
RE-LIGHTING
If one of the burners accidentally turns off
with the tap connected (i.e. turned), the
system will automatically attempt to re-
light the burner for 10 seconds.
Indicator of the burner being used
Off position
Maximum gas position
Minimum gas position
fig. 6
Triple ring
Fast
Semi-fast
Auxiliary
Table with diameters of cook-
ware according to the type of
burner
24 : 26
20 : 22
16 : 18
10 : 14
3500
3000
1750
1000
Burner
Power
(in Watts)
Diameter of
cookware
(in cm)
_
_
_
_
