9
Important
I N S TA L L ATION AND ADJUSTMENT MUST BE
CARRIED OUT BY AUTHORISED TECHNICAL
PERSONNEL ACCORDING TO THE APPLICABLE
INSTALLATION REGULATIONS.
Depending on the model to be installed an
a p e rt u re will be made in the worktop, of the
dimensions specified in the drawing 10. A
template is included in the packaging of
models CG.1 4G. and CG.1 3G. 1P. for the
c o rrect sizing of the aper t u re for these two
hob models.
Wa rning:
If the hob is assembled on any part
of the furn i t u re (drawers, cupboards, etc.) an
i n t e rmediate separation must be placed bet-
ween both at a minimum distance of 100 mm.
f rom the lower part of the plate to avoid any
i n v o l u n t a r y direct contact. This interm e d i a t e
separation must be permanent and only remo-
ved with tools.
For hobs with controls, its location must inclu-
de a ventilation slot at the front, of 110 cm
2
.
In this case the minimum distance between
the lower part of the hob and the upper part of
the furn i t u re below the hob will be 20 mm. If
t h e re is no front ventilation slot, the minimum
distance between the hob and the upper par t
of the furniture must be 130 mm.
The minimum ver tical distance of the lower
part of the piece of furniture placed above the
hob will be 600 mm.
The piece of furn i t u re where the hob with oven
is to be placed will be properly fixed.
* In the case of the granite hob the measu-
rement can be 580 mm.
Mod.: CG Lux-60 y CGC 4G
Mod.: CG.1 3G. 1P. y CG.1 4G.
Mod.: CG Lux-70
Mod.: CG Lux-75
Mod.: CG Lux-86
Installation
Positioning of the hobs
A
B
C
D
E
Drawing 10
61401134/329 ingles 18/7/03 16:55 Página 9
