BEACON WALL MOUNT™ (BWM)
IMPORTANT SAFETY INFORMATION LISTED ON REVERSE
READ, FOLLOW, AND SAVE ALL SAFETY AND INSTALLATION INSTRUCTIONS
DATE
5-4-18
40429 Brickyard Drive • Madera, CA 93636 • USA
559.438.5800 • FAX 559.438.5900
www.tekaillumination.com • [email protected]
REFERENCE NUMBER
INS-2574-01
2. Loosen locking ring set screw using a 5/64” Allen
wrench. Slide locking ring and canopy cover
forward on stem to expose mounting plate.
6. Slide locking ring and canopy cover back until
mounting plate is covered. Tighten set screw on
locking ring using a 5/64” Allen wrench.
Phase 2 - Fixture Installation
WIRING DIAGRAM
LINE
FIXTURE
COM
GROUND
LINE
COM
GROUND
4. Place wiring and connections into junction box.
Mount plate with mounting hardware (By Others)
to junction box.
Seal building envelope as
per NEC. Do not overtighten.
5. Reconnect quick disconnects. Slide fixture body
onto stem, then tighten two (2) #8-32 set screws
with a 5/64” Allen wrench.
Phase 1 - Rough In
Installation of Back box
1. Install Conduit (By Others) to be used with
this product.
2. Install junction box (By Others) so that front
face is flush with finished ceiling. Seal to
building envelope as per NEC.
3. Connect box to conduit and pull wires for
connections (See wiring diagram).
Additional Info
• Please follow National and Local electrical codes for your area.
• Suitable for through wire.
• Suitable for installation into combustible materials.
• Rated for 90° C.
• Junction box, universal mounting ring screws, box mounting hardware
and gaskets (By Others)
Junction box must be secured to a structural member suitable for
weight of the luminaire and other weight likely to be placed upon it.
1. Remove fixture body from stem by loosening two
(2) #8-32 set screws with a 5/64” Allen wrench.
Disconnect quick disconnect from leads to fixture
body.
3. Connect primary branch circuit wiring to fixture
leads using waterproof wire connectors (By
Others). Connect green incoming ground wire to
green ground wire on plate.
See wiring diagram.
Rectangular Canopy Instructions
