Installation and connection
12
Installation and connection – EHS-R immersion heater
Dimensioned drawing
inactive length
= distance from threaded head, which is not heated (120 mm)
The immersion heater must be installed horizontally in the cylinder.
With regard to the material, the immersion heater is suitable for installation in
DHW cylinders, but due to the predominant electroplating in the cylinder, less no-
ble metals than those of the immersion heater are damaged. The use of a suitable
sacrificial anode in the cylinder and regular checking of the anode (at least 2-3
times per year) is recommended. Otherwise, other inlet points in the cylinder or
the coating of the cylinder itself may be damaged.
