Tegam 1505A Скачать руководство пользователя

Страница: 10 / 27

10 TEGAM WAY • GENEVA, OHIO 44041 440-466-6100 • FAX 440-466-6110 • www.tegam.com

1-6

Section I – Introduction

Warranty

TEGAM, Inc. warrants this product to be free from defects in material and workmanship for a period of

three years from the date of shipment. During this warranty period, if a product proves to be defective,

TEGAM Inc., at its option, will either repair the defective product without charge for parts and labor, or

exchange any product that proves to be defective.

TEGAM, Inc. warrants the calibration of this product for a period of 1 year from date of shipment. During

this period, TEGAM, Inc. will recalibrate any product, which does not conform to the published accuracy

specifications.

In order to exercise this warranty, TEGAM, Inc., must be notified of the defective product before the

expiration of the warranty period. The customer shall be responsible for packaging and shipping the

product to the designated TEGAM service center with shipping charges prepaid. TEGAM Inc. shall pay for

the return of the product to the customer if the shipment is to a location within the country in which the

TEGAM service center is located. The customer shall be responsible for paying all shipping, duties, taxes,

and additional costs if the product is transported to any other locations. Repaired products are warranted

for the remaining balance of the original warranty, or 90 days, whichever period is longer.

Warranty Limitations

The TEGAM, Inc. warranty does not apply to defects resulting from unauthorized modification or misuse of

the product or any part. This warranty does not apply to fuses, batteries, or damage to the instrument

caused by battery leakage.

Statement of Calibration

This instrument has been inspected and tested in accordance with specifications published by TEGAM Inc.

The calibration of this instrument is traceable to the International System of Units (SI) through the

National Institute of Standards and Technology (NIST) or other recognized National Metrology Institutes,

by comparison to equipment and standards maintained in the laboratories of TEGAM Inc.

Document publishing dates may lag product changes.

Visit

www.tegam.com

to download the latest version of this manual.

Contact Information:

TEGAM INC.

10 TEGAM WAY

GENEVA, OHIO 44041

PH: 440.466.6100

FX: 440.466.6110

EMAIL:

[email protected]

WEB:

http://www.tegam.com

Содержание 1505A




























Результаты поиска

Содержание 1505A

Отзывы:

Похожие инструкции для 1505A

Бренды по названию

Популярные бренды

Tegam 1505A, Инструкция по эксплуатации и обслуживанию

Результаты поиска

Содержание 1505A

Отзывы:

Похожие инструкции для 1505A

Бренды по названию

Популярные бренды