Tefcold MTF Series, Руководство пользователя

Страница: 16 / 40

16
EN
5 – CLEANING OF THE
EQUIPMENT
Perform the external cleaning of your
equipment with cotton cloth and warm
water. Prevent the cleaning water from
penetrating into the lighting parts of
the equipment during cleaning.
Clean the cover seal only by
using clean soapy water. The plastic
components of your equipment might
get damaged due to cleaning with
chemical cleaners (such as thinner, etc.).
Checking and doing the maintenance
and repair of the equipment periodically
is called periodic maintenance. The
equipment does not require any
periodical maintenance.
5.1 – GLASS CLEANING
Attention must be paid especially to
the aspects stated below concerning
the glass surface of
MTF-Series
equipment, which is plated, located
inside and which has high heat
reflection feature and has low emission
level (Low-E):
• The cleaning of the plated part
inside the equipment must be made
when the equipment is off.
• Hard or sharp objects made of
metal (glass scraper, glass knife, steel
wool etc.) that may damage the glass
surfaces must not be used.
• Make sure that the glass surfaces
to be cleaned are exposed to too much
water and that they are thoroughly
dried after surface cleaning.
RECOMMENDATION
You can procure the cleaning
products recommended for
your equipment from the
Authorized Service.
WARNING
ELECTRIC SHOCK
Never wash this equipment.