Tefcold EXPRESS EX125C, Инструкция по эксплуатации

Страница: 22 / 59

dp Maximum defrost duration min./s 30 30
d4 Defrost when switching the instrument on - 0 0
d5 Defrost delay on power-up or when enabled by digital input min. 0 0
d6 Freeze control temperature display during defrost - 1 1
dd Dripping time min. 0 0
d8 Alarm bypass time after defrost h 1 1
d9 Defrost priority over compressor protectors - 0 0
d/ Defrost probe reading (2) °C/°F - -
dc Time base - 0 0
A Alarm Parameters
A0 Alarm and fan temperature differential °C/°F 0 0
Al Absolute/relative temperature for low temperature alarm °C/°F -8 -8
Ah Absolute/relative temperature for high temperature alarm °C/°F 20 20
Ad Temperature alarm delay min. 15 15
A4
3rd input configuration: 0=multifunction input disabled,
1=external alarm, 2=Enable defrost, 3=Start defrost on
closing, 4=Curtain switch and night-time operation,
5=Remote ON
– OFF, 6=Direct operation of AUX output with
H1=3, 7=Door switch with evaporator fans off, 8=Door switch
with evaporator fan and compressor off, 9=Direct/reverse
operating mode r3= 0 specifies the activation of the defrost
control, 10=Probe for dirty condenser alarm, 11=Product
probe
- 0 0
A7 Digital input alarm delay min. 30 30
A8 Enable alarm “Ed” (end defrost by timeout) - 0 0
Ac Set point dirty condenser alarm °C/°F 55 55
Ae Dirty condenser alarm differential temperature °C/°F 10 10
Acd Dirty condenser alarm delay min. 0 0
F Fan Parameters
F0 Enable evaporator fan control - 1 1
F1 Evaporator fan control set point °C/°F 50 50
F2 Stop evaporator fan if compressor off - 0 0
F3 Evaporator fan status during defrost - 0 0
Fd Post-dripping time min. 0 0
H Other Settings
H0 Serial address - 0 0