TEFAL INFINYMIX + SILENCE BL94C, Руководство пользователя

Страница: 4 / 33

3 2
EN
Be careful, verify there is nothing blocked under the knife (H.2/H.3)
(Fig.10) before put it inside the bowl (H.5) (Fig. 11)
Add the ingredients into the assembled chopper without exceeding the
maximum level indicated (Fig. 12):
• 550ml max
WARNING: Do not pour liquids into the XL chopper
Push the lid (H.1) on the XL chopper jar (H5) and turn it in the clockwise
direction (Fig. 13).
Make sure the lid is locked correctly (Fig. 14). If the lid is not correctly
locked, the blades will not turn. Put the assembled XL chopper jar (H)
correctly on the motor unit (D): A jar logo (E.2) will appear on the screen
and a bip signal will sound.
USING YOUR APPLIANCE
Speed
1 to 6
When the jar is on the base and when lid is correctly locked a bip signal will sound.
Slide your finger to the right to start blending from speed 1 to 6 a bip will sound at
each step.
Timer starts from 0:00 et goes up.
To pause, touch “Start/stop” a bip will sound and the speed lights will blink.
To resume, maintain “Start/stop” 1 bip will sound and light will turn on
To stop, slide finger back to the left on position 0 or touch “Start/stop” for 3 seconds,
a long bip will sound. The light goes back to 0 position.
Programs
Slide finger to the left a bip will sound for each position, a light will turn on for each
position, a timer display for each program
On each program position, Start/stop light blinks.
To start a program, maintain start/stop and 1 bip will sound.
To pause, maintain start/stop a bip will sound, the program and start/stop lights will blink.
To continue, maintain start/stop a 1 bip signal will sound, program and start/stop lights
will turn on.
To stop, touch the start and stop button for 3 seconds long bip signal will sound and light
will go back on 0 position.
Timer starts from the program time (ex : 1:30) and counts down
To indicate the end of the program 3 bips will sound (program and start/stop light blink)
and light will go back to 0 position
Pulse
function
Slide finger to the left on the “pulse” position a bip signal will sound and Start/
stop light will blink.
Touch then hold Start/Stop to activate pulse immediately (there is no lag
time between touch and the start of blending)
Release finger from Start/Stop button to stop (start/stop light will blink)
Speed /
Programs
Instructions
(C) nor the reducer (H.6)). Never put the motor unit
under running water. Clean it with a damp cloth
and dry it carefully. The blades are extremely sharp.
Make sure all the packaging has been removed before operating the
appliance.
ASSEMBLING AND FITTING THE JAR
Moisten the seal (C1) (even if already fitted on the blades unit (C2)). Be careful to
correctly fit the seal (C1) back onto the blade unit (C2) the correct way up (Fig. 1).
Place the blades unit (C2) on the locking ring (C3) (Fig. 2). Turn the jar upside
down and fit the assembled locking ring (C) with blades on the base of the
jar (Fig. 3). Lock it by rotating to lock ring (C3) in the clockwise direction (Fig.
3). Make sure the locking ring is locked correctly: the arrow on the jar must be
aligned with the arrow on the locking ring (Fig. 3).
To help you, you can use the back of the brush (G) to lock or unlock the locking
ring (C3)
Add the ingredients into the assembled jar without exceeding the maximum
level indicated (Fig. 4):
• 1.75 L for thick mixtures
• 1.5 L for liquid preparation
WARNING: Do not pour boiling liquids (over
80°C/176°F) into the jar
Lock the lid (A) on the jar (B) and turn it in the clockwise direction (Fig. 5).
Make sure the lid is locked correctly: the point on the lid should be aligned
with the handle (Fig. 6). Put the assembled cap (A3+A4) in position on
the lid and lock by rotating it in the clockwise direction. If the lid is not
correctly locked, your appliance will not start. Put the jar correctly on the
motor unit (Fig. 7): the point on the base of the jar should be aligned with
the padlock on motor unit (Fig. 7). A jar logo (E.1) will appear on the
screen (Fig. 7) and a bip signal will sound.
ASSEMBLING AND FITTING THE XL CHOPPER*
Place the reducer (H.6) on the locking ring (H.7) (Fig. 8). Lock it by rotating
to the XL chopper jar (H.5) in the anticlockwise direction (Fig. 9). The
closed padlock indicates when the blade holder is locked.
Assemble the blades by inserting the blade units onto the driver (Fig. 11)