TEFAL DV86XX, Инструкция по технике безопасности

Страница: 9 / 34

4
EN
Appliance cool completely down before putting
away. Loop cord loosely around appliance when
storing.
• The iron must be used and rested on a stable surface.
• When placing the iron on its stand, ensure that the
surface on which the stand is placed is stable.
• The iron must not be used if it has been dropped, if
there are visible signs of damage or if it is leaking.
• The appliance complies with the technical rules and
standards for safety currently in force
(electromagnetic compatibility, low voltage,
environment)
• Check the electrical power cord for signs of ware or
damage prior to use. If the electrical power is
damaged, it must be replaced at an approved
service center to avoid any danger.
• WARNING ! The voltage of your electrical
installation must correspond to that of the iron (220-
240V). Connecting to the wrong voltage may cause
irreversible damage to the iron and will invalidate
the guarantee.
The surfaces which are marked or close to with this
sign are very hot during the use of the appliance.
Do not touch these surfaces before the appliance
has cooled down.
SAVE THESE INSTRUCTIONS
9100019177-01 DV86XX E1.qxp_110x154 16/06/15 15:44 Page4