3. POTENTIAL PROBLEMS AND SOLUTIONS
Problems
Possible Causes
Solutions
It does not boil water
Boiling/keep warm button On-Off switch
or power unit connector may have failed.
Contact with technical service
Boiling/keep warm button and On-Off
switch are not in "I" position.
Take the Boiling/keep warm button
and On-Off switch to "I" position.
Because of little water, safety thermostat
has operated to prevent the uni from
starting.
Wait until the unit to cool down or
add cold water.
ıt bolis continously
Lid or teapot is not on the kettleç
Close the lid of kettle or place the
teapot on the kettle.
Boiling/keep warm button has failed.
Contact with technical service
It delays heating water
Excess lime on the kettle base
Clean the lime in the equipment as
described in the user's manual.
Boiling/keep warm button is not in boiling
position.
When On-off switch is in "I"
position, take the Boiling/keep
warm button to boiling position.
On-off switch does not
work
Excess lime on the kettle base
Clean the lime in the equipment as
described in the user's manual.
3.
RECYCLING
Contribution to Protection of Environment!
Your appliance is produced from recoverable or recyclable materials.
Deliver your worn out appliance to a waste collection centre for recycling
purposes
.
Regulation on Control of Waste Electrical and Electronic Appliances
This appliance must not be thrown into waste bin since it consists of recyclable parts
compliant with the Regulation on Control of Electrical and Electronic Appliances. Please
apply to the nearest collection centre for the recycling of this appliance.
4.
GUARANTEE
This product is used for domestic use only. It is not suitable for professional use.
The guarantee period is 2 (two) years commencing as of the date of delivery of the product.
The entire product, including all parts of the product, is within the coverage of guarantee of our company.
In a case of any failure within the guarantee period of the product, the period that is spent under repair shall be
added on the guarantee period.
The period of repair of the product is maximum 20 working days. This period commences on the date of notice
to the service station or - where there is no service station - to either one of the vendor, dealer, agency,
