TEFAL Beertender VB310, Руководство пользователя

Страница: 19 / 44

19
EN
Cleaning after daily use
• The drip tray and grate should be cleaned after every use. Remove the
grate before emptying out the drip tray. The grate must be set back in
place during normal use of the Beertender
® -
fig. 23
.
Note: You can wash the drip tray with warm water and a mild
detergent.
Note: Never use aggressive cleaning agents such as vinegar, acids,
solvents or petrol.
Cleaning after installation of a new Beertender
®
Keg
• When you install a new Beertender ® Keg you must clean the dispensing
spout. The spout is the only part of the appliance that comes into
contact with the beer -
fig. 24 .
It is essential to wash the tap nozzle using hot water.
Note:
the dispensing spout comprises plastic and metal parts that are
permanently joined together and do not pose any problems of hygiene.
Do not attempt to separate these parts.
• The beer dispensing mechanism must be cleaned using a damp cloth
and a mild detergent - fig. 25.
Note:
the upper part of the dispensing head may be washed with water
if it is then properly dried - fig. 26.
Note: Do not try to clean the mechanism using hard and/or sharp
objects, since doing so would risk damaging the machine.
Routine cleaning
Clean the appliance cooling chamber on a regular basis using a damp
cloth and mild detergent -
fig. 27 .
Note: Do not fill the cooling chamber with water as this may
result in permanent damage. Never use aggressive agents such as
vinegar, acids, solvents or petrol.
• The upper part of the cooling head must be removed. Wash the cooling
head with hot water and a gentle detergent.