TEFAL Beertender VB310, Руководство пользователя

Страница: 16 / 44

16
Inserting a Beertender
®
Keg
• Note: the Beertender
®
may only be used with Beertender
®
Kegs
“Compatible Beertender ® ” containing beer sold by the Heineken group.
• The appliance can only be used if it contains a Beertender ® Keg and
only if the main switch is set to “I”.
• The LED on the left side of the control panel, when illuminated, tells you
that the appliance is switched on.
• You can open the appliance by pressing the handle on top of the lid.
When the handle is released, you can lift the lid up - fig. 11-12.
Note: do not force the lid beyond the set opening position as this could
damage it.
• When the lid is completely open, insert a Beertender
®
Keg as shown in
the figure -
fig. 13
.
• Remove the upper part of the dispensing head (6) by lifting it upwards
as indicated in the illustration - fig. 14 .
Note: this cover can be removed for cleaning.
• Install the Beertender
®
keg tap.
Note:
Do not try to actuate the tap of the Beertender ® Keg by hand.
• Position the beer tube as shown on drawing - fig. 15 .
• Return the upper part of the dispensing head in its initial position.
Note: The upper part of the dispensing head cannot be repositioned
( fig. 16 ) if the Beertender
®
keg tap has not been properly set up.
• Ensure that the upper part of the dispensing head is positioned in the
beer pump mechanism before closing the lid.
• Ensure that the positioning of the upper part of the dispensing head
conforms to the one in the illustration so as not to damage the beer
pipe -
fig. 16 .
• Gently close the appliance lid again until it lock -
fig. 17
.
Control panel
• Two LEDs on the top of the lid provide important indications:
• Green ON LED on the left of the panel: when lit, it indicates that the
appliance is operating - fig. 18 .
USING THE BEERTENDER
®
SYSTEM