STEP 2
Assemble Main Shaft to the Table Frame
FAILURE to properly secure the Locking Knobs could result in
serious injury or death!
WARNING
!
8
STEP 3
Assemble Handles to Table Frame
• Hand tighten the Handles into the Handle Housings on each side of
the Table Frame (Figure 5).
FIGURE 5
FIGURE 4
FIGURE 3
Short
Setting
Standard
Setting
• With one of the Locking Knobs in hand, insert the Main Shaft into the
Bed Frame Assembly (Figure 3).
• Install the main shaft in the Standard Setting by lining up the first set
of holes on the Main Shaft with the back of the Table Bed (Figure 3).
Note: The Standard Setting on the Main Shaft will accommodate most
users. The second set of holes indicates the shorter height setting,
which may be used for users of smaller stature (Figure 3).
• Insert the Locking Knob and screw into one of the holes to hold the
Main Shaft in place (Figure 4).
• Insert and screw the second Locking Knob into the other hole.
Tighten the Locking Knob securely.
