Teeter FitSpine XC5, Руководство по сборке

Страница: 15 / 18

13
Ensure Owner’s Manual is Attached
The Owner’s Manual contains important information on
how to use your Teeter Inversion Table, including how to
personalize the user settings, properly secure and release
the Ankle Lock System, and test and adjust the rotation
control.
Figure 27: If the Owner’s Manual is not already attached,
secure the chain to the A‑Frame through the
designated hole in the Hinge Plate. Allow the Owner’s
Manual to hang freely on the outside of the A‑Frame
Spreader Arms so it doesn’t interfere with the rotation of
the Table Bed.
IMPORTANT: Once attached to the A‑Frame, DO NOT
remove the Owner’s Manual. It should remain permanently
attached to your inversion table to serve as a reference
for all users in regards to proper adjustment and use of
the equipment.
WARNING
!
View the Remainder of the Video
The Getting Started Video is a helpful supplement to the
Owner’s Manual, with easy‑to‑follow instructions on user
settings, how to invert, storage and maintenance, and even
stretching and exercises you can do with your Teeter.
Read the Owner’s Manual thoroughly before using your
Teeter Inversion Table. Improper settings could result
in serious injury or death!
BEFORE INVERTING
REVISIONS
ENGR DATE REV SHT ZONE DESCRIPTION
NMS 10/18/2017 A 1 8D A1: RELEASE FOR PATENT
PARTS LIST
ITEM QTY NET DIMENSIONS/DESCRIPTION NOTE MATERIAL SHT
REVISION STATUS
SHT 1
REV A
8
A
1 2 3 4 5 6 7
D
C
B
C
A
D
B
5 3 1 6 2 4 8 7
8
A
1 2 3 4 5 6 7
D
C
B
C
A
D
B
5 3 1 6 2 4 8 7
CX5 Full Assembly_right
SHEET 1 OF 1
REV
PROJECT:
DRAWN
UNLESS OTHERWISE NOTED
SURFACE ROUGHNESS PER ANSI B46.1
DIMENSIONING PER ASME Y14.5-2009
WELD SYMBOLS PER AWS A2.4
FINISH:
UOS 63RMS ON
MACHINED
SURFACES OR
AS PROCURED
.X
.XX
.XXX
ANGLE
EXPECTATIONS PROPRIETARY
THE INFORMATION CONTAINED HEREIN
IS PROPRIETARY TO EXPECTATIONS AND
SHALL NOT BE REPRODUCED IN WHOLE
OR IN PART OR USED FOR ANY PURPOSE
EXCEPT WHEN SUCH USER POSSESSES
DIRECT WRITTEN AUTHORIZATION
FROM EXPECTATIONS LLC
SCALE: FULL SIZE:
D
A
TOLERANCES
UNLESS NOTED
= .1
= .03
= .005
= 1
NICK SOLLER
FILLET RADII: .005-.010
CORNER BREAK: .005-.010
ALL DIMENSIONS IN INCHES
EXPECTATIONS LLC
PUYALLUP, WA 98391
DRAWING
PROJECT NAME HERE Figure 27