The
ISO Preferred Secure Ankle Brace
reduces the time it takes to heal discomfort from injuries or
post-surgery. Please follow your doctor’s instructions instructions explicitly and adjust or
discontinue use only as directed to achieve maximum benefit for your concerns.
ISO Preferred
Secure Ankle Brace
1.
Disengage all fastener straps and connections. Open and
separate the top plastic strap system.
2.
While seated, place the injured foot / ankle into the brace slowly in
the same manner that you would put on a shoe. Position your heal
so that it is resting snugly up against the back of the soft interior
liner.
5.
Simultaneously and equally pull both the straps that are attached to
both sides of the laces that run through the padding atop your foot.
(5)
Once you are comfortable with the snugness of this section of
the brace, attach both fastener strap pull tabs to the soft liner. Make
sure the brace feels secure and is centered to both sides of your
ankle.
4.
Fasten the straps into place. Make sure that the ankle brace feels
securely in place and that little movement can be achieved.
3.
Fasten the top section of the ankle brace by tucking the side with
the toothed strap underneath the other side and slide the toothed
strap through the hole in the overlaying strap. Before applying the
fastener straps into place, make sure that the rigid plastic is centered
over each equally.
ISO Preferred LLC , 1329 A Baptist World Center Dr. , Nashville, TN 37207
ISOpreferred.com
I
SO Preferred Secure Ankle Brace
is intended for the support of mild to moderate ankle and
chronic ankle instability. The secure ankle brace is prophylactic and therapeutic with use during
physical activities.
1
2
3
4
5
