ALWAYS
ensure that all parts are assembled correctly and
read the User Settings/How to Invert thoroughly before
using your Teeter DEX II . Improper assembly or settings
could result in serious injury or death!
WARNING
!
STEP 5
ATTACH LEG SUPPORT TO LAP PAD
Locate the Leg Support Assembly Hardware Kit (D11021).
Figure 5:
Thread the washers onto the bolts . With the
Leg Support Adjustment Knob facing down, slide the
Leg Support Shaft into the receiving end of the Lap Pad
Assembly . Lining up the two holes, insert the Hex Bolts
with washers . Secure with one of the wrenches provided .
Test the Lap Pad for smooth and steady rotation and that
all fasteners are secure:
1 . Stand between the Cane Shaped Handles with your
body facing the machine .
2 . Grasp the Traction Handles and rotate the Lap Pad
towards you .
Figure 6:
Apply your full weight to the Traction Handles by
lifting your legs off the floor and lightly bouncing .
Figure 5
Figure 6
7
The safety and integrity designed into the machine can only be maintained when the equipment is regularly
examined for damage and repaired . It is the sole responsibility of the user/owner or facility operator to ensure
that regular maintenance is performed . Worn or damaged components shall be replaced immediately or the
equipment removed from service until the repair is made .
• Facilities are responsible for the cleaning and maintenance of the equipment . All maintenance activities
shall be performed by qualified personnel .
• Regularly wipe down the unit with mild soap and water . DO NOT use abrasive cleaners or solvents .
• Schedule routine equipment inspections to verify that the unit is clean and functions properly, all parts
rotate smoothly, and all fasteners are secured .
For replacement parts or assistance, please contact Teeter Customer Service at 800-847-0143 or email
info@teeter .com .
MAINTENANCE
Bolts x2
Washer x2
