Teeter ComforTrak Series Скачать руководство пользователя страница 3

SAVE THESE INSTRUCTIONS

1

WARNING

!

IMPORTANT SAFETY INSTRUCTIONS

READ ALL INSTRUCTIONS BEFORE USING THE INVERSION TABLE

BEFORE YOU BEGIN:

 Review all steps before beginning assembly and read all precautions before using the inversion table.  

Carefully adhere to the Assembly Instructions and Owner’s Manual to help ensure safety and product integrity. 

FAILURE TO FOLLOW INSTRUCTIONS AND WARNINGS COULD RESULT IN SERIOUS INJURY OR DEATH. 

To reduce the risk of injury: 

• Read and understand all the instructions, review all other accompanying documents, and inspect the equipment before using the 

inversion table. It is your responsibility to familiarize yourself with the proper use of this equipment and the inherent risks of inversion 
if these instructions are not followed, such as falling on your head or neck, pinching, entrapment, equipment failure, or aggravating a 
pre‑existing medical condition. It is the responsibility of the owner to ensure that all users of the product are fully informed about the 
proper use of the equipment and all safety precautions.

• 

DO NOT

 use until approved by a licensed physician. Inversion is contraindicated in any medical or health condition that may be made 

more severe by an elevation of blood pressure, intracranial pressure or mechanical stress of the inverted position, or that may impact 
your ability to operate the equipment. This may include injury or illness, but also the side effects of any drug or supplement (prescribed 
or over‑the‑counter). Specific conditions may include, but not be limited to:

   ·

 Any condition, neurological or otherwise, which results in unexplained tingling, weakness or neuropathy, seizure, sleep disorder, 

  

lightheadedness, dizziness, disorientation, or fatigue, or impacts strength, mobility, alertness, or cognitive ability;

   ·

 Any brain condition, such as trauma, history of intracranial bleed, history or risk of TIA or stroke, or severe headaches;

   ·

 Any condition of the heart or circulatory system, such as high blood pressure, hypertension, increased risk of stroke, or use of  

 

    anticoagulants (including high doses of aspirin);

   ·

 Any bone, skeletal or spinal cord condition or injury, such as significant spinal curvature, acutely swollen joints, osteoporosis,   

    fractures, dislocations, medullary pins or surgically implanted orthopedic supports;

   ·

 Any eye, ear, nasal or balance condition, such as trauma, history of retinal detachment, glaucoma, optic hypertension, chronic  

    sinusitis, middle or inner ear disease, motion sickness, or vertigo;

   ·

 Any digestive or internal condition, such as severe acid reflux, hiatal or other hernia, gallbladder or kidney disease; 

   ·

 Any condition for which exercise is specifically directed, limited or prohibited by a physician, such as pregnancy, obesity,  

  

or recent surgery.

• 

ALWAYS

 be certain the Ankle Lock System is properly adjusted and fully engaged, and that your ankles are secure before using 

the equipment. HEAR, FEEL, SEE and TEST that the Ankle Lock System is snug, close‑fitting and secure EVERY TIME you use the 
equipment.

• 

ALWAYS

 wear securely tied lace‑up shoes with a flat sole, such as a normal tennis‑style shoe. 

• 

DO NOT

 wear any footwear that could interfere with securing the Ankle Lock System, such as shoes with thick soles, boots, high‑tops 

or any shoe that extends above the anklebone.

• 

DO NOT

 use the inversion table until it is adjusted properly for your height and body weight. Improper settings can cause rapid 

inversion or make returning upright difficult. New users, and users who are physically or mentally compromised, will require the 
assistance of a spotter. Make sure the equipment is set to your unique user settings prior to each use.

• 

DO NOT

 sit up or raise head to return upright. Instead, bend knees and slide your body to the foot‑end of the inversion table to change  

weight distribution. If locked out in full inversion, follow the instructions for releasing from the locked position before returning upright.

• 

DO NOT

 continue using the equipment if you feel pain or become light‑headed or dizzy while inverting. Immediately return to the 

upright position for recovery and eventual dismount. 

• 

DO NOT

 use if you are over 6 ft 6 in (198 cm) or over 300 lbs. (136 kg). Structural failure could occur or head/neck may impact the floor 

during inversion.

• 

DO NOT

 allow children to use this machine. Keep children, bystanders, and pets away from machine while in use. The inversion table  

is not intended for use by persons with reduced physical, sensory or mental capabilities, unless they are given supervision and 
instruction concerning use of the machine by a person responsible for their safety.

• 

DO NOT

 store the inversion table upright if children are present. Fold and lay the table on the floor. 

DO NOT

 store outdoors.

• 

DO NOT

 use aggressive movements, or use weights, elastic bands, any other exercise or stretching device or non‑Teeter

®

 attachments 

while on the inversion table. Use the inversion table only for its intended use as described in this manual. 

• 

DO NOT

 drop or insert any object into any opening. Keep body parts, hair, loose clothing and jewelry clear of all moving parts. 

• 

DO NOT

 use in any commercial, rental or institutional setting. This product is intended for indoor, home‑use only. 

• 

DO NOT

 operate equipment while under the influence of drugs, alcohol, or medication that may cause drowsiness or disorientation.

• 

ALWAYS

 inspect the equipment prior to use. Make sure all fasteners are secure.

• 

ALWAYS

 replace defective components immediately and/or keep the equipment out of use until repair.

• 

ALWAYS

 position equipment on a level surface and away from water or ledges that could lead to accidental immersion or falls.

• Refer to additional warning notices posted on the equipment. If a product label or Owner’s Manual should become lost, damaged or 
  illegible, contact Customer Service for replacement.

Содержание ComforTrak Series























































Отзывы: