HOW TO INVERT
PRIOR TO USE
Step One
• Inspect the equipment before each use. Make sure that the Lap Pad rotates smoothly to the inverted
position (approximately 90 degrees) and back and that all fasteners are secure.
Step Two
• The DEX II
TM
features
two adjustment settings
that allow you to properly adjust the equipment for your
body type. Make sure the equipment is properly adjusted every time you use the equipment by
A)
adjusting the height of the Lap Pad, and
B)
adjusting the width between the Leg Rollers and Lap Pad:
A. Adjust the height of the Lap Pad:
i.
Loosen the Height Adjustment Knob by rotating it several turns
counterclockwise.
ii. Pull the locking pin for the Chrome Shaft while lifting or lowering the
Lap Pad by the Height Adjustment Handle on the back of the Lap Pad.
iii. Select a height setting so that your hips are at the same height as the
top edge of the Lap Pad.
iv. Release the Locking Pin so that it engages fully into one of the height
settings. Tighten the Height Adjustment Knob by rotating clockwise.
v. Make sure the Locking Pin is fully engaged and the Height Adjustment
Knob is tightened prior to use.
Failure to do so could result in serious
injury!
B. Adjust the width between the Leg Rollers and Lap Pad:
i.
Loosen the Leg Width Adjustment Knob by rotating it several turns
counterclockwise.
ii. Pull out on the Leg Width Adjustment Knob and slide the Leg Rollers in or
out depending on your leg width and comfort.
iii. Release the Leg Width Adjustment Knob so that it engages fully into one
of the hole settings. Tighten the Leg Width Adjustment Knob by rotating clockwise.
iv. Make sure the Leg Width Adjustment Knob is fully engaged and tightened prior to use.
Failure to do so could result in serious injury!
USER MANUAL
The DEX II
TM
operates strictly under user control - that is, you are able to rotate the unit as slow or as fast as
you desire. You will need to use the strength of your arms to lower your body down and to return upright.
If you
are unsure about your ability to operate the equipment properly, always have a spotter nearby or discontinue
the use of the equipment.
Step One
•
Step onto the cross bar of the Base Frame with thighs between the
Leg Rollers and Lap Pad.
•
Determine whether the width between the Leg Rollers and Lap Pad is
comfortable. Adjust if necessary.
•
Determine whether the Lap Pad is at the correct height. Your hips
should be the same height as the top edge of the Lap Pad. Adjust if
necessary.
DEX II
TM
User Manual
LD-2000 Pg. 2
A. Adjust Height
B. Adjust Leg Width
Step One
User stands inside
the Leg Rollers -
hips should align
with the top edge
of the Lap Pad
