DEX II
TM
Assembly Instructions LD-2000 Pg. 3
STEP FIVE
Testing the Assembly
PRIOR TO USE:
•
Test the Lap Pad for smooth and steady rotation.
•
Ensure that all fasteners are secure.
The assembly of the DEX II
•
decompression & extension
TM
is now complete! Please remember:
•
Read the User Manual and accompanying materials thoroughly before using the DEX II
TM
. Improper
use could result in serious injury or death.
•
Please complete and mail the warranty card.
STEP FOUR
Attach the Leg Support Assembly (H1-2000) to the Lap Pad
Assembly (H1-2005)
•
You may need to remove the Hex Bolts (H1-1415) and Flat
Washers (H1-1414) from the Leg Support Shaft (H1-2004).
•
Slide the Leg Support Shaft into the receiving end of the Lap Pad
Assembly. (
See Figure 4
) Lining up the two holes, insert the Flat
Washers and Hex Bolts. Secure with wrench.
Figure 4
ASSEMBLY INSTRUCTIONS
