CenterLine 230BP; Müller SPRAYDOS Installation Manual
020-041-UK R5
5
CenterLine 230BP; Müller SPRAYDOS Installation Manual
020-041-UK R5
CenterLine 230BP; Müller SPRAYDOS Installation Manual
020-041-UK R5
1008-0190
SYSTEM DESCRIPTION:
POS DESCRIPTION
1
CenterLine 230BP
2
Speed output connector
3
RS232 port (Programming and GPS input)
4
Fuse 3A
5
Foot switch connector 2P (Foot switch is optional)
6
CAN connector 4P
7
Power connector 2P
8
BoomPilot adapter cable (PN 199-263)
9
Müller SPRAYDOS adapter cable, (! Different part number for 5, 7 and 9 section)
10
ABSC adapter box, PN 902-361
11
Power connector, ABSC adapter box
12
SPRAYDOS controller
13
Machine connector from ABSC box
14
Power connector, Müller SPRAYDOS
15
Machine connector from Sprayer
INSTALLING THE SPRAYDOS ADAPTER CABLE
To get electrical contact with the sections and the Master switch in the SPRAYDOS, it's necessary
to install the adapter cable (POS. 9), in the SPRAYDOS controller. This is a critical operation and
must only be conducted of persons with the necessary skills.
SPRAYDOS adapter cable
The adapter cable can only be installed
in SPRAYDOS controllers where the con-
nector between the processor board and
the main board is a 'Low-profile' type
(See picture 'OLD TYPE').
In case the SPRAYDOS controller is dam-
aged during the installation, it's on the
buyers sole risk and therefore the buyer is
not entitled to any form for compensation.
