3
EN
pic.1
1. Housing
2. Polyurethane insulation
3. Heating tank (enamelled)
4. Screw, seal, nut, washer
5. Heater with seal
6. Flange
7. Flange sealing rubber
8. Counter-flange
9. Thermoregulator
10. Mg-anode
11. Connection tube for water
12. Rings
13. Connection tube for hot water
output
14. Signal lamp
15. Thermoregulator button
16. Thermometer
17. Support for hanging to wall
18. Screws for support
TECHNICAL INFORMATION
Electrical accumulation water heaters are designed to work with pressure of
the water supply pipeline. The appliance is not meant for persons (including
children) of reduced psychophysical abilities, unless under supervision of
persons responsable for their safety, i.e. for persons not skilled for use of the
appliance. Improper use of the appliance, especially from the side of children,
should be prevented.
Water heaters are made according to valid standards and tested and certified by
authorized laboratory. Product technical characteristics are given on the sticker
„Table with Characteristics“ between connection pipes.
Picture 1 shows design of the water heater with all parts
